Siding & Soffit Components

All components are made of 100% extruded architectural aluminum and provide easy to install, noncombustible, weather-resistant starting, intersection, connection, expansion, mid, and ending points for the installation of Tongue & Groove and Panelboard siding and soffit. 

All trim pieces come in all woodgrain, specialty, naturally aged metal, and solid colors to match your selected siding and soffit material.

Starters

Play Video

Precision Starter J-Track

  • Width: 5/8″
  • Manufactured in 12-foot lengths
  • Houses an internal spine to allow all T&G cladding to be received
  • Allows for a clean, precise starting point

SKU# 1SJT.145

Play Video

Traditional Starter Strip

  • Width: 1-7/8″
  • Manufactured in 12-foot lengths
  • Allows for a clean, precise starting point

SKU# 2SS.145

J-Track

Play Video

Traditional Two-Piece J-Track

  • Width: 1-3/8″
  • Manufactured in 12-foot lengths
  • Will serve as a visible trim receiving your selected cladding material
  • Allows for a clean, precise starting point

SKU# 1X2JT.145

Play Video

Precision Two-Piece J-Track

  • Width: 5/8″
  • Manufactured in 12-foot lengths
  • Will serve as a visible trim securing the structure, look, and feel of your selected cladding
  • Allows for a clean, precise ending point

SKU# 1X1JT.145

Play Video

Precision J-Track

  • Width: 5/8″
  • Manufactured in 12-foot lengths
  • Will serve as a visible trim receiving your selected cladding
  • Allows for a clean, precise starting point

SKU# 1JT.145

Termination Sets

Play Video

Traditional Termination Set

  • Width: 1-3/8″
  • Manufactured in 12-foot lengths
  • Will serve as a visible trim terminating the structure, look, and feel of your selected cladding
  • Allows for a clean, precise ending point

SKU# 2TS.145

Play Video

Precision Termination Set

  • Width: 5/8″
  • Manufactured in 12-foot lengths
  • Will serve as a visible trim terminating the structure, look, and feel of your selected cladding
  • Allows for a clean, precise ending point

SKU# 1TS.145

Corner Pieces

Play Video

Traditional Corner Set

  • Width: 2″
  • Manufactured in 12-foot lengths
  • Will serve to receive cladding material to terminate where two flat surfaces meet at a 90-degree angle
  • Once trim is installed against substrate the finishing cap will “snap” into place
  • Allows for a clean, precise connection point

SKU# 2CORS.145

Play Video

Craftsman Inside Corner

  • Width: 3/4″
  • Manufactured in 12-foot lengths
  • Will serve to receive cladding material to terminate where two flat surfaces meet at a 90-degree angle
  • Single piece that makes installation simple and efficient
  • Allows for a clean, precise connection point

SKU# 1IC.145

Play Video

Craftsman Outside Corner

  • Width: 1″
  • Manufactured in 12-foot lengths
  • Will serve to receive cladding material to terminate where two flat surfaces meet at a 90-degree angle
  • Single piece that makes installation simple and efficient
  • Allows for a clean, precise connection point

SKU# 1OC.145

Play Video

Precision Outside Corner

  • Width: 3/16″
  • Manufactured in 12-foot lengths
  • Will serve to receive cladding material to terminate where two flat surfaces meet at a 90-degree angle
  • Single piece that makes installation simple and efficient
  • Allows for a clean, precise connection point

SKU# 05OC.145

Compression Joints

Play Video

Traditional Compression Joint

  • Width: 1-3/8″
  • Manufactured in 24-foot lengths
  • Serves as a structural support and architectural trim that can receive all claddings
  • This joint overlays the cladding below and connects directly to the next planned row utilizing the quick screen clips
  • Allows for a clean, precise connection point

SKU# 2CJ.289

Reveal Sets

Play Video

Traditional U-Reveal Set

  • Width: 1-1/2″
  • Manufactured in 12-foot lengths
  • Serves as an expansion component at corners and in soffit areas
  • Very pronounced in nature, will enhance the appearance between large sections of cladding whether vertical or horizontal
  • Allows for a clean, precise connection point

SKU# 2URS.145

Play Video

Craftsman U-Reveal Set

  • Width: 3/4″
  • Manufactured in 12-foot lengths
  • Serves as an expansion component at corners and in soffit areas
  • Less pronounced in nature, will enhance the appearance between large sections of cladding whether vertical or horizontal
  • Allows for a clean, precise connection point

SKU# 1URS.145

Play Video

Traditional Flat Reveal Set

  • Width: 1-1/2″
  • Manufactured in 12-foot lengths
  • Serves as an expansion component at corners and in parallel soffit areas ONLY
  • Very pronounced in nature, will enhance the appearance between large sections of cladding whether vertical or horizontal
  • Allows for a clean, precise connection point

SKU# 2FRS.145

Play Video

Precision Flat Reveal

  • Width: 1/2″
  • Manufactured in 12-foot lengths
  • Serves as an expansion component at corners and in soffit areas
  • Very pronounced in nature, will enhance the appearance between large sections of cladding whether vertical or horizontal
  • Allows for a clean, precise connection point

SKU# 1FR.145

Play Video

Precision T&G Flat Reveal

  • Width: 1/2″
  • Manufactured in 12-foot lengths
  • Serves as a visible trim receiving your selected cladding specifically for directional changes
  • Allows for a clean, precise custom detail

SKU# 1TGFR.289

Play Video

Craftsman T&G U-Reveal

  • Width: 3/4″
  • Manufactured in 24-foot lengths
  • Serves as a visible trim receiving your selected cladding
  • Allows for a clean, precise custom detail

SKU# 1TGURK.289

Play Video

Traditional T&G U-Reveal

  • Width: 1-1/2″
  • Manufactured in 24-foot lengths
  • Serves as a visible trim receiving your selected cladding
  • Allows for a clean, precise custom detail

SKU# 2TGURK.289

Perforated Components

Play Video

Perforated V Groove (Soffit Vent Strip)

  • Width: 2-1/2″
  • Manufactured in 12-foot lengths
  • Will serve as a visible trim where venting is required by code or building requirements and where air flow is not obstructed by framing above
  • Allows for a clean, precise custom and functional detail

SKU# 3VP.145

Samples

PLEASE NOTE:

  • We are unable to provide flat chips, all of our samples are cut from actual profiles.

  • Please allow 1-2 days for processing, and 5-7 business days for ground shipments. Overnight requests rely on FedEx cut-off times.

  • Certain Profiles such as 2ft samples may require a production lead time of 3-6 business days before shipping *

  • WE ARE UNABLE TO SHIP TO PO BOXES

Need Help?

Contact Us

We’re happy to answer all of your questions.

Complete the form or give us a call at 

866-716-2436

Complete the form or give us a call at

866-716-2436

Tongue & Groove System

Link & Lock System

Privacy Beams System

 

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Request a Quote